Discussion:
How to use Smart Bluetooth Keyboard with h3970 v.0.8.1
(too old to reply)
chan
2005-03-03 13:50:21 UTC
Permalink
Hi,

I have Smart Bluetooth Keyboard
http://shop.brando.com.hk/btsmartkeyboard.php , I bought it 2 months
ago.

Since v.0.8.1 and with many help from here, I can use familiar
(replaced PocketPC). So it now time for me to start using my Smart
Bluetooth Keyboard.

I have checked at wiki http://www.handhelds.org/moin/moin.cgi/kbdd

I can modprobe modules.

***@h3900:~# modprobe keybdev
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/input.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/keybdev.o
***@h3900:~# hcitool scan
Scanning ...
***@h3900:~# hcitool scan
Scanning ...
***@h3900:~# hcitool scan
Scanning ...

But I don't know how to setup it, I try to scan bluetooth device but
it found nothing (bluetooh also is now connecting with phone for
bluetooth gprs).

Could you explain to to setup to use Smart Bluetooth Keyboard?

Thank you and advance, and sorry to distrub your time again.

Best regards,

Chan
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
***@handhelds.org
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
chan
2005-03-03 14:05:17 UTC
Permalink
Hi,

For addtional:

I make /etc/init.d/kbdd as

***@h3900:/etc/init.d# cat kbdd
#!/bin/sh
#

. /etc/profile

case $1 in
'start')
/usr/sbin/kbdd -p /dev/tts/1 -t smartbt > /dev/null 2>&1 &
#echo "edit $0 to match your configuration"
;;

'stop')
killall kbdd
;;

*)
echo "usage: $0 { start | stop }"
;;

esac

***@h3900:/etc/init.d#

But sorry I just knew that I don't have /usr/sbin/kbdd.

***@h3900:/etc/init.d# /usr/sbin/kbdd -p /dev/tts/1 -t smartbt
-sh: /usr/sbin/kbdd: not found
***@h3900:/etc/init.d#

So my question now is,

1. my /etc/init.d/kbdd is correct or not?
2. I don't know how to compile kbdd as instruction, can I get it from
somewhere please.

Thank you in advance.

Best regards,

Chan
Post by chan
Hi,
I have Smart Bluetooth Keyboard
http://shop.brando.com.hk/btsmartkeyboard.php , I bought it 2 months
ago.
Since v.0.8.1 and with many help from here, I can use familiar
(replaced PocketPC). So it now time for me to start using my Smart
Bluetooth Keyboard.
I have checked at wiki http://www.handhelds.org/moin/moin.cgi/kbdd
I can modprobe modules.
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/input.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/keybdev.o
Scanning ...
Scanning ...
Scanning ...
But I don't know how to setup it, I try to scan bluetooth device but
it found nothing (bluetooh also is now connecting with phone for
bluetooth gprs).
Could you explain to to setup to use Smart Bluetooth Keyboard?
Thank you and advance, and sorry to distrub your time again.
Best regards,
Chan
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
***@handhelds.org
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
Koen Kooi
2005-03-03 14:22:35 UTC
Permalink
Post by chan
Hi,
I have Smart Bluetooth Keyboard
http://shop.brando.com.hk/btsmartkeyboard.php , I bought it 2 months
ago.
Since v.0.8.1 and with many help from here, I can use familiar
(replaced PocketPC). So it now time for me to start using my Smart
Bluetooth Keyboard.
I have checked at wiki http://www.handhelds.org/moin/moin.cgi/kbdd
I can modprobe modules.
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/input.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/keybdev.o
Scanning ...
Scanning ...
Scanning ...
But I don't know how to setup it, I try to scan bluetooth device but
it found nothing (bluetooh also is now connecting with phone for
bluetooth gprs).
Could you explain to to setup to use Smart Bluetooth Keyboard?
1) ***@drone:~# hcitool scan
Scanning ...
00:0A:3A:03:21:2A KEYBOARD

2) ***@drone:~# cat /etc/bluetooth/rfcomm.conf
#
# RFCOMM configuration file.
#
# $Id: rfcomm.conf,v 1.1 2002/10/07 05:58:18 maxk Exp $
#

rfcomm0 {
# Automatically bind the device at startup
bind no;

# Bluetooth address of the device
device 00:0a:3a:03:21:2a;

# RFCOMM channel for the connection
channel 1;

# Description of the connection
comment "Smart BT keyboard";
}
3) ***@drone:~# rfcomm bind rfcomm0
4) ***@drone:~# kbdd -p /dev/bluetooth/rfcomm/0 -t smartbt
5) type away!

I just got it working yesterday, so I haven't got round to putting this
in the wiki. I hope this works for you too.

regards,

Koen
Post by chan
Thank you and advance, and sorry to distrub your time again.
Best regards,
Chan
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
***@handhelds.org
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
chan
2005-03-03 14:43:54 UTC
Permalink
Hi Koen,

Thank you so much again. So great!.

For kbdd I found latest update on yesterday,
http://familiar.handhelds.org/releases/v0.8.1/feed/base/kbdd_0.8+cvs-20050302-r2_arm.ipk
, sorry last mail, stupid question :P

I'll try all now.

Best regards,

Chan

On Thu, 3 Mar 2005 15:22:35 +0100, Koen Kooi
Post by chan
Post by chan
Hi,
I have Smart Bluetooth Keyboard
http://shop.brando.com.hk/btsmartkeyboard.php , I bought it 2 months
ago.
Since v.0.8.1 and with many help from here, I can use familiar
(replaced PocketPC). So it now time for me to start using my Smart
Bluetooth Keyboard.
I have checked at wiki http://www.handhelds.org/moin/moin.cgi/kbdd
I can modprobe modules.
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/input.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/keybdev.o
Scanning ...
Scanning ...
Scanning ...
But I don't know how to setup it, I try to scan bluetooth device but
it found nothing (bluetooh also is now connecting with phone for
bluetooth gprs).
Could you explain to to setup to use Smart Bluetooth Keyboard?
Scanning ...
00:0A:3A:03:21:2A KEYBOARD
#
# RFCOMM configuration file.
#
# $Id: rfcomm.conf,v 1.1 2002/10/07 05:58:18 maxk Exp $
#
rfcomm0 {
# Automatically bind the device at startup
bind no;
# Bluetooth address of the device
device 00:0a:3a:03:21:2a;
# RFCOMM channel for the connection
channel 1;
# Description of the connection
comment "Smart BT keyboard";
}
5) type away!
I just got it working yesterday, so I haven't got round to putting this
in the wiki. I hope this works for you too.
regards,
Koen
Post by chan
Thank you and advance, and sorry to distrub your time again.
Best regards,
Chan
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
***@handhelds.org
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
chan
2005-03-03 16:15:09 UTC
Permalink
Hi Koen,

My kbdd is kbdd_0.8+cvs-20050302-r2_arm.ipk
02-Mar-2005 06:25 10K

But keybdev module is installed with v.0.8.1 (no upgrade).

I failed please see below message:

***@h3900:/etc/init.d# hcitool scan
Scanning ...
00:0A:3A:03:2A:B2 KEYBOARD
***@h3900:/etc/init.d# l2ping 00:0A:3A:03:2A:B2
Ping: 00:0A:3A:03:2A:B2 from 08:00:17:11:A6:40 (data size 20) ...
44 bytes from 00:0A:3A:03:2A:B2 id 0 time 51.19ms
44 bytes from 00:0A:3A:03:2A:B2 id 1 time 44.79ms
2 sent, 2 received, 0% loss
***@h3900:/etc/init.d# rfcomm
rfcomm0: 00:0A:3A:03:2A:B2 channel 1 clean
***@h3900:/etc/init.d# kbdd -p /dev/bluetooth/rfcomm/0 -t smartbt
failed to open uinput device: No such file or directory
init uinput failed

Sorry to distrub you really.

Best regards,

Chan



On Thu, 3 Mar 2005 15:22:35 +0100, Koen Kooi
Post by chan
Post by chan
Hi,
I have Smart Bluetooth Keyboard
http://shop.brando.com.hk/btsmartkeyboard.php , I bought it 2 months
ago.
Since v.0.8.1 and with many help from here, I can use familiar
(replaced PocketPC). So it now time for me to start using my Smart
Bluetooth Keyboard.
I have checked at wiki http://www.handhelds.org/moin/moin.cgi/kbdd
I can modprobe modules.
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/input.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/keybdev.o
Scanning ...
Scanning ...
Scanning ...
But I don't know how to setup it, I try to scan bluetooth device but
it found nothing (bluetooh also is now connecting with phone for
bluetooth gprs).
Could you explain to to setup to use Smart Bluetooth Keyboard?
Scanning ...
00:0A:3A:03:21:2A KEYBOARD
#
# RFCOMM configuration file.
#
# $Id: rfcomm.conf,v 1.1 2002/10/07 05:58:18 maxk Exp $
#
rfcomm0 {
# Automatically bind the device at startup
bind no;
# Bluetooth address of the device
device 00:0a:3a:03:21:2a;
# RFCOMM channel for the connection
channel 1;
# Description of the connection
comment "Smart BT keyboard";
}
5) type away!
I just got it working yesterday, so I haven't got round to putting this
in the wiki. I hope this works for you too.
regards,
Koen
Post by chan
Thank you and advance, and sorry to distrub your time again.
Best regards,
Chan
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
***@handhelds.org
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
Koen Kooi
2005-03-03 16:39:13 UTC
Permalink
Post by chan
Hi Koen,
My kbdd is kbdd_0.8+cvs-20050302-r2_arm.ipk
02-Mar-2005 06:25 10K
But keybdev module is installed with v.0.8.1 (no upgrade).
Scanning ...
00:0A:3A:03:2A:B2 KEYBOARD
Ping: 00:0A:3A:03:2A:B2 from 08:00:17:11:A6:40 (data size 20) ...
44 bytes from 00:0A:3A:03:2A:B2 id 0 time 51.19ms
44 bytes from 00:0A:3A:03:2A:B2 id 1 time 44.79ms
2 sent, 2 received, 0% loss
rfcomm0: 00:0A:3A:03:2A:B2 channel 1 clean
failed to open uinput device: No such file or directory
Try 'modprobe uinput'

regards,

Koen
Post by chan
init uinput failed
Sorry to distrub you really.
Best regards,
Chan
On Thu, 3 Mar 2005 15:22:35 +0100, Koen Kooi
Post by chan
Post by chan
Hi,
I have Smart Bluetooth Keyboard
http://shop.brando.com.hk/btsmartkeyboard.php , I bought it 2 months
ago.
Since v.0.8.1 and with many help from here, I can use familiar
(replaced PocketPC). So it now time for me to start using my Smart
Bluetooth Keyboard.
I have checked at wiki http://www.handhelds.org/moin/moin.cgi/kbdd
I can modprobe modules.
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/input.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/keybdev.o
Scanning ...
Scanning ...
Scanning ...
But I don't know how to setup it, I try to scan bluetooth device but
it found nothing (bluetooh also is now connecting with phone for
bluetooth gprs).
Could you explain to to setup to use Smart Bluetooth Keyboard?
Scanning ...
00:0A:3A:03:21:2A KEYBOARD
#
# RFCOMM configuration file.
#
# $Id: rfcomm.conf,v 1.1 2002/10/07 05:58:18 maxk Exp $
#
rfcomm0 {
# Automatically bind the device at startup
bind no;
# Bluetooth address of the device
device 00:0a:3a:03:21:2a;
# RFCOMM channel for the connection
channel 1;
# Description of the connection
comment "Smart BT keyboard";
}
5) type away!
I just got it working yesterday, so I haven't got round to putting this
in the wiki. I hope this works for you too.
regards,
Koen
Post by chan
Thank you and advance, and sorry to distrub your time again.
Best regards,
Chan
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
***@handhelds.org
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
chan
2005-03-04 04:36:24 UTC
Permalink
Hi Koen,

It's working now with GPE v.0.8.1 (without package update).
When it asked passkey I inputed 0000. Though I found sometime single
keypress repleated many charectors.

Thank you very much.

Best regards,

Chan

On Thu, 3 Mar 2005 17:39:13 +0100, Koen Kooi
Post by Koen Kooi
Post by chan
Hi Koen,
My kbdd is kbdd_0.8+cvs-20050302-r2_arm.ipk
02-Mar-2005 06:25 10K
But keybdev module is installed with v.0.8.1 (no upgrade).
Scanning ...
00:0A:3A:03:2A:B2 KEYBOARD
Ping: 00:0A:3A:03:2A:B2 from 08:00:17:11:A6:40 (data size 20) ...
44 bytes from 00:0A:3A:03:2A:B2 id 0 time 51.19ms
44 bytes from 00:0A:3A:03:2A:B2 id 1 time 44.79ms
2 sent, 2 received, 0% loss
rfcomm0: 00:0A:3A:03:2A:B2 channel 1 clean
failed to open uinput device: No such file or directory
Try 'modprobe uinput'
regards,
Koen
Post by chan
init uinput failed
Sorry to distrub you really.
Best regards,
Chan
On Thu, 3 Mar 2005 15:22:35 +0100, Koen Kooi
Post by chan
Post by chan
Hi,
I have Smart Bluetooth Keyboard
http://shop.brando.com.hk/btsmartkeyboard.php , I bought it 2 months
ago.
Since v.0.8.1 and with many help from here, I can use familiar
(replaced PocketPC). So it now time for me to start using my Smart
Bluetooth Keyboard.
I have checked at wiki http://www.handhelds.org/moin/moin.cgi/kbdd
I can modprobe modules.
Using /lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/input.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/input/keybdev.o
Scanning ...
Scanning ...
Scanning ...
But I don't know how to setup it, I try to scan bluetooth device but
it found nothing (bluetooh also is now connecting with phone for
bluetooth gprs).
Could you explain to to setup to use Smart Bluetooth Keyboard?
Scanning ...
00:0A:3A:03:21:2A KEYBOARD
#
# RFCOMM configuration file.
#
# $Id: rfcomm.conf,v 1.1 2002/10/07 05:58:18 maxk Exp $
#
rfcomm0 {
# Automatically bind the device at startup
bind no;
# Bluetooth address of the device
device 00:0a:3a:03:21:2a;
# RFCOMM channel for the connection
channel 1;
# Description of the connection
comment "Smart BT keyboard";
}
5) type away!
I just got it working yesterday, so I haven't got round to putting this
in the wiki. I hope this works for you too.
regards,
Koen
Post by chan
Thank you and advance, and sorry to distrub your time again.
Best regards,
Chan
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar
_______________________________________________
The Familiar Linux Distribution
Familiar mailing list
***@handhelds.org
https://handhelds.org/mailman/listinfo/familiar
irc://irc.freenode.net #familiar

Loading...